Molybdenum Foil in High
Even though molybdenum foil is small enough, yet it can be used in high-pressure chamber as an important part to ensure this machine works. Picture following is to illustrate the small but important molybdenum foil.
(a) High-pressure chamber.
(b) Sample assembly. Cutaway view of the sample assembly between conidial anvils (dimensions are in mm).
1: Sample
2: boron nitride capsule
3: high-resistivity graphite furnace
4: molybdenum foil
5: stainless-steel electrical feed-through
6: boron-epoxy (5:1) insulator gasket
7: swaged chromel-alumel thermocouple
8: ceramic sheath
9: pressure calibrate
Related Products:
Molybdenum foil is one of molybdenum products. It usually produced by molybdenum plate. The plate after machining can obtain 0.2mm flat rolling molybdenum, molybdenum foil, and the minimum purity is 99.9%.
Cleaned molybdenum wire, namely white molybdenum wire, is molybdenum wire removes graphite coating on the surface by using the methods of electrolytic cleaning and hydrogen-sintered cleaning, and has a good bright and shiny surface. The diameter of cleaned molybdenum wire is ranging from 0.05mm to 3mm.
Spray molybdenum wire is regularly covered with graphite. When removed graphite, spray molybdenum wire is metallic luster. It has a good high-temperature tensile strength and corrosion resistance after sintering, forging, and drawing.
Pure molybdenum can be presented in many types. Molybdenum bar is one popular product made of molybdenum. Therefore, molybdenum bar shares the properties of molybdenum, which are high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.